logo
Να στείλετε μήνυμα
Shenzhen Ofeixin Technology Co., Ltd
Προϊόντα
Νέα
σπίτι > Νέα >
Ειδήσεις επιχείρησης περίπου Power Line Communication (PLC) in Energy IoT: How IEEE 1901.1 Enables Smart Grids and Solar Energy Storage
Εκδηλώσεις
Επαφές
Επαφές: Miss. Joanna
Φαξ: 86-755-23191990
Επικοινωνήστε τώρα
Μας ταχυδρομήστε

Power Line Communication (PLC) in Energy IoT: How IEEE 1901.1 Enables Smart Grids and Solar Energy Storage

2026-11-18
Latest company news about Power Line Communication (PLC) in Energy IoT: How IEEE 1901.1 Enables Smart Grids and Solar Energy Storage
With the rapid development of solar power, energy storage, smart metering, distribution automation, and building energy management systems, energy infrastructure is evolving from a traditional one-way power delivery network into a digitally connected ecosystem involving a growing number of distributed devices.

These systems require more than basic data acquisition. They need reliable, manageable, and scalable communication capabilities that can operate in complex electrical environments.

Power Line Communication (PLC) uses existing electrical wiring to transmit data, offering a practical connectivity option in applications where installing dedicated communication cables may be costly or technically challenging.

Designed for smart grid applications, IEEE 1901.1 defines the physical layer (PHY) and medium access control (MAC) mechanisms for medium-frequency PLC below 12 MHz. It employs technologies such as Orthogonal Frequency Division Multiplexing (OFDM) to address the complex characteristics of power line channels.

The Digitalization of Energy Systems Is Making Connectivity a Core Infrastructure Requirement

The transformation of power systems goes beyond changes in the energy generation mix. Distributed solar power, residential and commercial energy storage, electric vehicle charging infrastructure, smart meters, and distribution automation equipment are introducing an increasing number of devices that need to be monitored, managed, and coordinated across the grid.

Modern energy networks must do more than deliver electricity. They also need to monitor equipment conditions, collect operational data, receive control commands, and maintain continuous communication with energy management platforms.

According to the International Energy Agency's (IEA) 2026 report on grid modernization, global electricity demand grew at approximately twice the rate of overall energy demand over the past decade. By 2035, global grid capacity will need to expand by at least 30%, involving approximately 25 million kilometers of power lines.

Digitalization, grid-enhancing technologies, and more flexible operating models are expected to play important roles in improving the utilization of existing grid infrastructure.

This trend indicates that energy digitalization is extending beyond control centers and major substations. It is increasingly reaching distribution networks, metering devices, inverters, energy storage systems, buildings, and end-use equipment.

As the number of connected devices grows and deployment environments become more distributed, communication costs, reliability, maintenance complexity, and long-term availability become increasingly important factors in the design of Energy IoT systems.

 

Why Does Energy IoT Need PLC?

PLC transmits data through existing electrical conductors. Its primary value is not to replace wireless communication in every application, but to provide an alternative communication path when devices are already connected to power lines and additional cabling or wireless coverage may be difficult to implement.

1. Reusing Existing Power Lines to Reduce Additional Cabling Requirements

In applications such as smart meters, distribution equipment, street lighting controllers, solar installations, and energy storage systems, power lines are often already available at device locations.

Installing separate communication cables may involve additional costs related to conduits, cable trays, construction permits, power shutdowns, and long-term maintenance.

PLC can reuse existing electrical wiring to carry data, reducing the need for dedicated communication cabling in suitable applications.

2. Suitable for Fixed Equipment That Requires Both Power and Communication

PLC is particularly relevant to fixed installations that remain connected to a power supply over extended periods.

For smart meters, distribution monitoring terminals, lighting control nodes, energy gateways, and certain power electronic devices, power delivery and communication can be planned around the same infrastructure.

3. Aligning Communication Networks with Electrical Infrastructure

The topology of energy equipment is often closely associated with distribution networks, building electrical circuits, and on-site power infrastructure.

PLC network planning can therefore be aligned with the electrical topology, potentially providing connectivity to fixed devices in locations where wireless coverage is less reliable.

4. Understanding the Limitations of PLC

Power lines are not originally designed as dedicated data communication channels.

Changes in electrical loads, switching power supply noise, interference from motors and variable-frequency drives, variations in line impedance, branch structures, and coupling methods can all affect communication performance.

Spectrum regulations, power distribution structures, and installation requirements also vary across countries and regions, influencing the feasibility of PLC deployment.

For this reason, PLC projects require on-site channel testing, noise assessment, coupling and isolation design, surge protection, and electrical safety evaluation.

Actual communication distance and stability should never be determined solely by a module's nominal specifications.

IEEE 1901.1: A Medium-Frequency PLC Standard for Smart Grid Applications

The official title of IEEE 1901.1-2018 is IEEE Standard for Medium Frequency (less than 12 MHz) Power Line Communications for Smart Grid Applications.

The standard is designed for smart grid applications and covers the physical layer (PHY) and medium access control (MAC) layer of PLC systems. It addresses the characteristics of power line channels through mechanisms related to modulation, channel access, reliability, security, and coexistence.

From a technical perspective, IEEE 1901.1 belongs to the medium-frequency PLC category operating below 12 MHz.

It should not be confused with every technology referred to as PLC, nor should it be treated as equivalent to narrowband PLC standards such as IEEE 1901.2 or broadband PLC solutions.

Different standards have different frequency ranges, data rates, application objectives, network requirements, and physical-layer mechanisms. Product selection should therefore be based on the specific chipset and module documentation, certification information, and regulatory requirements of the target market.

OFDM: A Key Technology for Handling Complex Power Line Channels

Orthogonal Frequency Division Multiplexing (OFDM) distributes a high-speed data stream across multiple mutually orthogonal subcarriers.

Power line channels may experience frequency-selective fading, narrowband interference, and complex noise conditions. OFDM can improve channel adaptability through subcarrier configuration, channel estimation, and corresponding coding and modulation mechanisms.

However, OFDM does not guarantee stable PLC performance on every electrical network.

Actual link performance depends on cable length, cable type, the number of branches, load-related noise, coupling circuit design, transmission power limitations, receiver sensitivity, and network protocol configuration.

Engineering projects should validate link budget, packet error rate, latency, and long-term communication stability under real operating conditions.

Standard Evolution: Developments in IEEE 1901.3-2025

Published in 2025, IEEE 1901.3-2025 addresses hybrid physical-layer communication involving PLC and radio frequency (RF) technologies below 12 MHz.

This development reflects growing interest in combining power line and wireless communication links for energy-related applications.

However, the publication of this standard does not mean that existing IEEE 1901.1 modules automatically support hybrid PLC/RF functionality.

Support for such capabilities must be verified against the specific chipset platform, hardware design, firmware, and official product specifications.

τα τελευταία νέα της εταιρείας για Power Line Communication (PLC) in Energy IoT: How IEEE 1901.1 Enables Smart Grids and Solar Energy Storage  0

Key Application Areas for IEEE 1901.1 PLC

1. Smart Grids and Distribution Automation

Distribution automation requires the collection and control of data from power line conditions, switching equipment, distribution terminals, and metering nodes.

For devices with available power line infrastructure, fixed installation locations, and clearly defined communication requirements, PLC can be considered as one of the candidate communication technologies.

System design should evaluate potential limitations related to transformer boundaries, line segmentation, signal coupling, network management, and fault isolation.

2. Smart Metering and Electricity Data Collection

Smart meters need to periodically report electricity consumption data, receive configuration parameters, and support remote management.

PLC can establish local communication links through existing power lines, particularly in projects where electrical infrastructure is already available and operators aim to reduce additional communication cabling.

However, metering standards, frequency allocations, and utility requirements vary significantly across regions.

Compatibility with local standards must be confirmed. IEEE 1901.1 support alone should not be considered sufficient evidence of universal compatibility across global smart metering markets.

3. Solar Inverters and Distributed Energy Resources

Distributed solar power systems typically include photovoltaic modules, inverters, combiner equipment, metering devices, and energy management terminals.

Their communication networks need to support equipment monitoring, power generation data transmission, alarm reporting, and operational parameter management.

In certain system configurations, existing AC or DC power infrastructure may provide an opportunity to evaluate PLC as a communication option.

However, switching devices and power electronic conversion processes in solar systems can also introduce electrical noise.

Communication coupling points, isolation methods, and electromagnetic compatibility (EMC) design must therefore be carefully validated.

4. Energy Storage Systems and Energy Management

Energy storage systems consist of multiple subsystems, including battery clusters, battery management systems (BMS), power conversion systems (PCS), thermal management, fire protection, metering, and energy management platforms.

Their communication networks need to support equipment monitoring, alarm reporting, operational strategy updates, and coordination among different subsystems.

PLC may serve as a supplementary communication option in certain fixed installations, existing power wiring environments, and local control networks.

However, the real-time performance, security, and redundancy requirements of critical control links must be evaluated independently. PLC should not automatically be assumed suitable for every protection-related or safety-critical control function.

5. Smart Lighting and Building Energy Management

In industrial parks, street lighting networks, commercial buildings, and hotels, lighting equipment is often widely distributed while power lines are already installed.

PLC can be evaluated for lighting control, equipment status monitoring, group management, and energy consumption data collection.

For practical deployment, particular attention should be paid to line branches, switching power supply noise, signal transmission between different electrical circuits, electrical safety, and maintenance requirements.

6. EV Charging Infrastructure and Other Energy-Consuming Devices

EV charging infrastructure, heat pumps, building controllers, and industrial energy-consuming equipment are contributing to the development of more observable and controllable power systems.

PLC may be considered as one communication option for certain fixed installations with suitable electrical conditions.

Its suitability should be evaluated in combination with device interfaces, local regulations, communication protocols, and cybersecurity requirements.

τα τελευταία νέα της εταιρείας για Power Line Communication (PLC) in Energy IoT: How IEEE 1901.1 Enables Smart Grids and Solar Energy Storage  1

PLC, Wi-Fi, and Bluetooth: Complementary Technologies in Energy IoT

Energy IoT systems rarely rely on a single communication technology.

PLC is closely associated with power infrastructure and fixed electrical equipment. Wi-Fi is suitable for high-throughput local network access, gateway connectivity, and devices requiring higher data transmission capacity. Bluetooth is well suited to short-range configuration, commissioning, maintenance, and low-power device connectivity.

These technologies can perform different functions within the same system.

For example, in a distributed energy system:

PLC may provide communication links between selected inverters or distribution nodes and a central gateway through existing electrical wiring.

Wi-Fi may connect gateways, maintenance terminals, and local management equipment.

Bluetooth may support on-site commissioning, parameter configuration, and device maintenance by installation personnel.

The actual architecture should be determined by data volume, communication distance, power consumption, deployment costs, interference conditions, and cybersecurity requirements.

Key Considerations for PLC Module Selection and Engineering Validation

Standards and Frequency Bands: Confirm the specific standard version, operating frequency range, modulation methods, and spectrum requirements in the target country or region. Similar standard names do not necessarily imply interoperability.

Power Line and Coupling Design: Evaluate AC or DC line types, cable lengths, branch structures, transformer isolation, and the selection of coupling and isolation circuits.

Interference Resistance: Test the effects of switching power supplies, motors, variable-frequency drives, and power electronic equipment under actual operating conditions.

Network Performance: Evaluate effective throughput, packet error rate, latency, node capacity, retransmission mechanisms, network recovery, and long-term operating stability.

Interfaces and Host Integration: Verify whether interfaces such as UART, SPI, I2C, GPIO, PWM, and ADC meet the requirements of the host processor and device control architecture.

Security and Reliability: Assess link encryption, device authentication, key management, firmware updates, surge protection, insulation withstand voltage, EMC performance, and environmental adaptability.

Regulatory Compliance and Certification: Confirm applicable electrical safety, electromagnetic compatibility, power line or radio-frequency emission regulations, and industry-specific market access requirements.

QOGRISYS PLC Modules: Product Options for IEEE 1901.1 Applications

QOGRISYS currently features two PLC modules on its official website: 3121N-H and S130N-ISI.

Both support IEEE 1901.1 and can serve as product options for equipment manufacturers evaluating power line communication solutions.

Actual suitability should be assessed in relation to the target application, electrical topology, host platform, and local regulatory requirements.

3121N-H

According to the official product information, the 3121N-H module measures 18 × 28 mm and integrates a multi-mode PLC modem, line driver, and ARM Cortex-M3 processor.

It supports IEEE P1901.1 and provides relevant OFDM/FSK communication capabilities.

The data rate listed on the official website is 0.507 Mbps. Available interfaces include I2C, UART, PWM, GPIO, and ADC.

The module can be evaluated for smart power equipment, data acquisition terminals, and other fixed installations connected to power infrastructure.

S130N-ISI

According to the official product information, the S130N-ISI module measures 20.6 × 12.6 mm and features a 32-bit ARM Cortex-M3 processor and a 32-bit DSP architecture.

It integrates Flash and 1 MB of SRAM, with interfaces including UART, PWM/EPWM, GPIO, ADC, SPI, and I2C.

The module supports IEEE 1901.1 and lists modulation schemes including BPSK, QPSK, and 16QAM. Its specifications also include support related to the SGCC Q/GDW 11612 standard.

The two modules differ in their interface resources, hardware architecture, and specification focus.

During project evaluation, manufacturers should verify the latest datasheets, reference designs, firmware versions, frequency configurations, host interface timing, and certification status for each model.

Data rates, frequency ranges, and functional capabilities specified for one module should not be automatically applied to the other.

τα τελευταία νέα της εταιρείας για Power Line Communication (PLC) in Energy IoT: How IEEE 1901.1 Enables Smart Grids and Solar Energy Storage  2

Overseas Market Opportunities: Starting with Energy Digitalization Needs

Rather than applying a single solution to every country, PLC market development should begin with an understanding of regional energy infrastructure, technical requirements, and project conditions.

Europe

European markets continue to advance distributed energy resources, smart metering, building energy efficiency, and distribution grid digitalization.

These developments create requirements for connectivity, data acquisition, and system integration across a growing number of terminal devices.

Market entry requires careful verification of local power line communication spectrum regulations, smart metering ecosystems, utility or grid operator specifications, as well as applicable CE, EMC, and electrical safety requirements.

North America

Distribution automation, smart metering, energy storage, and commercial and industrial energy management are important areas of activity in North America.

Equipment suppliers may need to go through multi-stage validation processes involving utilities, system integrators, and equipment OEMs.

Solution adaptation should take into account local grid structures, certification requirements, existing communication systems, and project procurement specifications.

Southeast Asia and the Middle East

The development of solar power, energy storage, industrial park energy management, and infrastructure projects in Southeast Asia and the Middle East also creates potential demand for Energy IoT equipment.

However, power infrastructure maturity, line conditions, spectrum management, and procurement models vary significantly across countries.

Test results obtained in one region should not be directly generalized to other markets without further validation.

For PLC module suppliers, international market development requires more than presenting standards and product specifications.

Manufacturers should also provide English-language datasheets, reference designs, interface documentation, EMC test information, typical application topologies, field validation recommendations, and ongoing technical support.

Future Trends: Toward Multi-Technology Connectivity and System-Level Reliability

First, the continued growth of distributed energy resources will drive communication requirements beyond basic meter reading toward broader equipment monitoring and coordinated operation at the distribution level.

Second, the integration of PLC and RF technologies is attracting attention in standardization activities. However, actual product capabilities must always be verified against implemented hardware and software functions.

Third, cybersecurity and lifecycle management will become increasingly important. Energy equipment needs to account for device authentication, key management, remote firmware updates, and long-term maintenance.

Fourth, communication solutions will place greater emphasis on field adaptability. Line noise, electrical topology, installation methods, and local regulations will remain critical factors influencing deployment success.

From an industry perspective, no single communication technology will independently meet all Energy IoT requirements.

PLC, Wi-Fi, Bluetooth, cellular networks, and dedicated communication technologies will serve different functions at different levels of the system.

Competitive solutions will depend on the integration of standards compliance, hardware design, software protocols, field engineering, and security mechanisms.

Conclusion

The value of IEEE 1901.1 PLC lies in providing a communication option that allows fixed, power-connected devices in smart grids and Energy IoT systems to use existing electrical wiring for data transmission.

As smart metering, distribution automation, solar power, energy storage, and building energy management systems continue to develop, communication requirements among energy devices will become increasingly diverse.

PLC is not a universal replacement for Wi-Fi or Bluetooth, nor is it a solution that can be deployed directly on every power line.

Its practical value depends on standard compatibility, line conditions, coupling design, interference resistance, system security, and engineering validation.

For equipment manufacturers and system integrators evaluating IEEE 1901.1, the recommended approach is to begin with the actual application topology and on-site channel testing, then determine the appropriate solution based on module interfaces, software support, and the regulatory requirements of the target market.